The excavator took out a corner pin. Now it's a surveyor bill.
“When I was building my house the excavator took out a corner pin. cost me $300 for the surveyor to come out and set a new one.” — landowner, TractorByNet, https://www.tractorbynet.com/forums/goto/post?id=2151392
A property corner pin is a legal monument, and only a licensed surveyor can set or reset one — which is why there's no cheap version of this bill. Landowners report $300 to have a single knocked-out pin reset, $700 to have one corner surveyed, with quotes on the same parcel running to $1,700. Full-lot surveys with monuments set run into the thousands. Driving your own rebar where you think the corner was costs almost nothing and is worth exactly that: it has no legal standing, and a wrong DIY pin is how boundary disputes start.
But most 'lost' pins aren't destroyed — they're just buried. Frost heave, fill dirt, leaf litter and time put a few inches of soil over an iron pin that is still exactly where the surveyor set it. That kind of lost is findable for free: pull the distances off your plat, tape from a known corner or two, and sweep the area with a metal detector. Iron rebar with a surveyor's cap rings loud, and it's rarely more than a few inches down.
The pins that actually die are killed by machines — an excavator blade, a grader pass, a fence contractor's auger. Almost always it happens because nobody on the machine knew a pin was there. That's the preventable part: before any work, walk your corners, expose each pin, and flag it high enough for an operator to see from the seat.
While each pin is open to the sky, record it: a GPS point standing on the cap, a photo of the cap's markings, a note with the plat distances to the nearest reference points. A phone mark is not a survey and never replaces the monument — what it does is walk you back to within a few steps years later, where the photo and the detector finish the job in minutes. Mark Once keeps every corner on your phone, works offline at the far end of any acreage, and costs less than one reset pin — the one your flags keep the excavator from erasing.
Mark Once — one file, offline, no subscription.
No account, no marketplace. Solo and Homestead are one-time purchases; crews license annually. Works without internet, and every coordinate stays on your own device.
Common questions
- Can I replace a survey pin myself?No. Corner monuments are legal artifacts that only a licensed surveyor may set or reset. A pin you drive yourself has no legal standing and can create a boundary dispute that costs far more than the $300–$700 reset.
- How do I find a buried survey pin?Measure in from a known corner using your plat distances, then sweep with a metal detector — iron rebar with a cap rings clearly and usually sits only a few inches down. Most 'missing' pins are buried, not gone.
- What good is marking a pin by GPS if it's not survey-grade?It doesn't establish your boundary — it protects the monument that does. The mark walks you back to within a few steps, the photo confirms the cap, and the flags you plant before excavation keep a machine from turning a found pin into a $700 re-survey.